Accuracy @23°C (F.S.) +/- 0,15% (+/- last digit)   Tk [offset] automatical balancing - AutoTara   Tk [relativ (F.S.)] +/- 0,02% (°K) Measuring Principle   bi-directionaler sensor with strain gauges and high-speed data processing μProzessor Operation Mode standard Display the current value, either in cN | N | gf | kgf | oz | lb   peak maximum levels from tensile and compression (pointer function)   memory statistics standard | continuos | single value   limit value 2 separately adjustable limits Overload max. admitted 500% (F.S.) | *bei 5 kN 200%   max. display range 150% (Fn - tared) Display type LCD, 5-digit, 12 mm high   update time (standard) 1000 msec | 500 msec | 200 msec | 100 msec | 50 msec (selectable)   update time (peak) 1 msec Power Supply standard solar cell Interface PC-interface USB USB 2.0   limit signal TTL   RS232C optional adapter cable   analog output optional adapter cable   digimatic optional adapter cable Temerature Range operation 0 ... 40°C Housing Material weight 480g   L x B x H 150 x 82 x 29 mm   material aluminium dye cast   fixing 2 x M4, 2 x M5, centering holes Protection Class (without cable) IP40 / IP65 (ab 500N) Shipment: Force Gauge with screw-on accessories (flat, notched and cone head, hook, chisel,), Quickstart manual, carrying case with foam insert.

Part Designation	Price	Number
FMI-S30A5 Force Gauge (Range 0 to 5N | resolution 0.001 N)	695,00 €
FMI-S30B1 Force Gauge (Range 0 to 10N | resolution 0.002 N)	695,00 €
FMI-S30B5 Force Gauge (Range 0 to 50N | resolution 0.01 N)	695,00 €
FMI-S30C1 Force Gauge (Range 0 to 100N | resolution 0.02 N)	695,00 €
FMI-S30C5 Force Gauge (Range 0 to 500N | resolution 0.1 N)	695,00 €
FMI-S30K1Force Gauge (Range 0 to 1000N | resolution 0.2 N)	695,00 €
FMI-S30K5 Force Gauge (Range 0 to 5000N | resolution 1 N)	895,00 €

Calibration Certificate according to VDI / VDE 2624 Sheet 2.1 1R (tensile) Description: FMI-800N1 Standardized calibration for a new force gauge to 1000N (if you also order the device). Traceable to PTB / DKD / ILAC standards.  > Calibration certificate

75,00 €

FMI_Connect 2.03 - AddIn MSExcel Description: FMI-972

79,00 €

Vertical test stand with handwheel, max. 500N Description: FMI-210_00 Tabletop unit with base plate and recording for the series force gauges FMI, FMI-S and SN.

695,00 €

Hand grips for FMI-S, L=80 Description: FMI-941M10 (1 Set = 2 grips)

39,00 €

T-grip for FMI-S, B=70, M10 thread Description: FMI-942M10

39,00 €

Large hook, 50mm Description: FMI-953 Large hook for up to 50mm diameter for force gauge with thread M6. Holding force up to 500N.

39,00 €

Fork hook, thread M6 Description: FMI-950 Fork hook with 30 mm side width for force gauge with M6 thread. Holding force up to 500N. (20 to 500N)

39,00 €

Chuck, 0.5...6mm Description: FMI-951M6 Chuck, for bore diameter 0,5...6 mm for force gauges with thread size M6. Maximum force 500N (depending on test sample).

150,00 €

Film-/foil grip, 15mm, M6 Description: FMI-955-15 FMI-955-15 Film- und Folienklemm mit 15mm Breite für Kraftmessgerät mit Gewindeanschluss M6. Max. Klemmkraft bis 500N

139,00 €

Film-/foil, 20mm, M6 Description: FMI-955-20 Film- und Folienklemm mit 20mm Breite für Kraftmessgerät mit Gewindeanschluss M6. Max. Klemmkraft bis 500N

139,00 €

Film Grip Jaw, 50mm, M6 Description: FMI-955-50 Film Grip Jaw, 50 mm width, suitable for force gauges with thread size M6. Max. clamping force 500N.

169,00 €

Standard accessories set, M6 Description: FMI-901M6 Compatible with M6 thread connection force gauges. (Series FMI-100/200/210/220/230 except subject those ends with suffix A2 and A5).

85,00 €

Standard accessories set, M10 Description: FMI-901M10 Compatible with M10 thread connection force gauges (FMI-300; FMI-400).

135,00 €

Spare case with insert for FMI-S Description: FMI-912 For FMI-S10/20/30.

19,50 €